User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!


This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r1751 [2016/08/01 17:02]
Ellen Manning
handover:r1751 [2016/08/02 17:24] (current)
Ellen Manning
Line 5: Line 5:
 Module: USN-0017, start pos 0 GB Module: USN-0017, start pos 0 GB
-   * 17:00UT - Experiment stater ok. (Ellen)+   * 17:00UT - Experiment stater ok. (Ellen) ​Source=3C418 (Arwin) 
 +   * 00:00UT (approx). Stopped observations due to scheduled power outage at site. (Jim) Last scan was either 214-2350 or 214-2358. (Arwin) 
 +   * 10:45UT mk5yg had to be power cycled using the internet power switch after getting the following error "​ALARM:​ error m5  -23 mk5cn: error opening, mark 5 probably not running, see above for error"​ 
 +   * 10:50UT ntpq server offsets were large, running a sync on fmset fixed the issue. Checked with on call person as well. (Arwin) 
 +   * 11:00UT Experiment started again following restoration of power to the site. First valid scan will be 11:06 UT, scan name 215-1106a, source = 1424-418. (Arwin) 
 +   * 11:05UT Data at start was 335.512, approx (914.8-335.512) Gb of data was missed. Setting the offset to +579.28 in log monitor. (Arwin) 
 +   * Had the following error every scan "​WARNING:​ error wx   -2 met: can not connect to server."​. I imagine this is due to the missing weather recording hardware? (Arwin) 
 +   * 14:09UT Autocorrelation spectra has some issues but checked with the on call person and decided no action was neccesary. Channel 5 was consistently as shown in the image below  (Arwin) 
 +{{ :​handover:​screenshot_from_2016-08-03_00_07_41.png?​300 |}}
 {{tag>}} {{tag>}}
Line 11: Line 19:
/home/www/auscope/opswiki/data/attic/handover/r1751.1470070946.txt.gz · Last modified: 2016/08/01 17:02 by Ellen Manning