User Tools

Site Tools


handover:r1766

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r1766 [2016/11/14 16:28]
Lucas Hyland
handover:r1766 [2016/11/15 07:39] (current)
Ross Turner
Line 1: Line 1:
 ====== R1766 ====== ====== R1766 ======
 +
 +**Notes**
 +
 +eremote still doesn'​t appear to work on ops8 OR ops4, the backup control doesn'​t appear to connect either (I could be wrong, I'm not very familiar with it). So the current way to view/​monitor the experiment is to have the VNC to the pcfs open and have the logs going. Then you ssh into the pcfs from ops8 and find the '​stream_log'​ script.
 +
 +It is currently located in /​home/​observer/​deh/​opsutils/​ so cd to that dir and type (e.g for hb):
 +
 +./​stream_log hb
 +
 +This will begin streaming the log from pcfs to /​tmp/​hb.log. Then from the log monitor, start monitoring that file (/​tmp/​hb.log). Seems to be best to do a clkoff first.
 +
 +
 +**Because e-remote control is not working, checklists are unavailable. Will be regularly running through the checklist points and noting anything out of the ordinary below.**
  
 **Hobart 12m** **Hobart 12m**
  
 Disk vsn: BKG+0142/​4000 Disk vsn: BKG+0142/​4000
 +Start position: 3.269 GBs
  
-START POSITION0.000 GBs +  * Autocorrelation spectrum at Hobart is a mess. Reconfigured dbbc and still no change. I'll see what happens after the experiment begins and if it fixes itself (Lucas). Updateafter first scan it was fine. Must have been the bug in the plotting program
 +  * Experiment started ok (Lucas). 
 +  * 0042 - Ran fmset to correct jumps in reported pps_delay through the DBBC. (JMc)
  
 **Katherine** **Katherine**
  
 Disk vsn: HOB+0094/​160000 Disk vsn: HOB+0094/​160000
 +Start position: 9051.643 GBs
  
-START POSITION: 9049.846 GBs+  * Getting error '​computer to acu time difference exceeded 0.25 seconds, see value above' every second. All the delays are fine and the beep is extremely annoying. Wiki says error is meaningless (probably network issues?) but I cannot turn the beep off (Lucas). 
 +  * Experiment started ok (Lucas). 
 +  * 2200 - Rebooted drives in HMI to clear the ACU time difference problem. (JMc)
  
  
Line 18: Line 36:
  
 Disk vsn: HOB0104/​16000 Disk vsn: HOB0104/​16000
 +Start position: 7877.132 GBs
  
-START POSITION: 7875.337 GBs+  * Experiment started ok (Lucas). 
 +  * 05:34 Wind stow, missed scan 320-0535b (Bryn)
  
  
/home/www/auscope/opswiki/data/attic/handover/r1766.1479140898.txt.gz · Last modified: 2016/11/14 16:28 by Lucas Hyland