User Tools
handover:r1780
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
handover:r1780 [2017/02/22 00:08] Ross Turner |
handover:r1780 [2017/02/22 15:55] (current) Ross Turner |
||
|---|---|---|---|
| Line 10: | Line 10: | ||
| * 1700UT Experiment started OK. (Bryn) | * 1700UT Experiment started OK. (Bryn) | ||
| * 2210UT Tiege taking over, current telescope status: telescope working OK. (Tiege) | * 2210UT Tiege taking over, current telescope status: telescope working OK. (Tiege) | ||
| + | * 0946UT Halt issued for SPACEX tracking pass(JS) | ||
| + | * 1021UT Onsource after SPACEX (JS) | ||
| + | * 11:23UT SpaceX started and stopped at 12:02UT. The next recording was 12:08UT. Jon noted that the pointed corrections were set to REFRAC+MODEL ever since the last spacex run, currently set to NONE. | ||
| + | * 12:57UT halted for Spacex again. (Arwin) | ||
| + | * 13:38:30 UT recording started again after spacex. (Arwin) | ||
| **Katherine** | **Katherine** | ||
| Line 24: | Line 29: | ||
| * 2225UT On the Phone to Brett, trying to fix this telescope. Bretty seems to think that something might be off in the telescope pedestal, meaning that the receiver is powered down. Martin is going to go take a look in 20 mins or so. (Tiege) | * 2225UT On the Phone to Brett, trying to fix this telescope. Bretty seems to think that something might be off in the telescope pedestal, meaning that the receiver is powered down. Martin is going to go take a look in 20 mins or so. (Tiege) | ||
| * 2350UT IF power level issue fixed. All I ended up having to do was use the 'reboot system' command on the UoT interface on the timing computer. Ke has now joined R1780, did not manage to complete a pointing check for it as I got error fivept command not setup correctly. Apart from that it seems to be recording fine now. First valid scan is 052-2356a. (Tiege) | * 2350UT IF power level issue fixed. All I ended up having to do was use the 'reboot system' command on the UoT interface on the timing computer. Ke has now joined R1780, did not manage to complete a pointing check for it as I got error fivept command not setup correctly. Apart from that it seems to be recording fine now. First valid scan is 052-2356a. (Tiege) | ||
| + | * 0011UT Field system complaining about antenna pointing, interrupst 053-0009 to run a pointing check. this was completed by 0020 UT and first valid scan since is 053-0026. (Tiege) | ||
| + | * 0040UT The problems continue, now getting rfpcn:time-out errors which have been seen many times before. Tend to be fixed by restarting Rxmon on fs pc, halted schedule and restarted Rxmon. First scan after this reset is 053-0047b (Only missed 053-0040a). (Tiege) | ||
| + | * 0140UT rfpcn time-out error happening again, restarted Rxmon again. will keep monitoring. (Tiege) | ||
| + | * 15:51 UT noticed that the generator state is not green. (Arwin) | ||
| **Yarragadee** | **Yarragadee** | ||
| Line 46: | Line 55: | ||
| * 2210UT Tiege taking over, current telescope status: Experiment still on hold, still cannot connect to mk5. Going to take another look at this and see if I can sort it out. (Tiege) | * 2210UT Tiege taking over, current telescope status: Experiment still on hold, still cannot connect to mk5. Going to take another look at this and see if I can sort it out. (Tiege) | ||
| * 2325UT Currently on the phone to brett attempting to fix Yg and Ke, On-site people at Yg are taking a look at the telescope for us while we look at Ke. (Tiege) | * 2325UT Currently on the phone to brett attempting to fix Yg and Ke, On-site people at Yg are taking a look at the telescope for us while we look at Ke. (Tiege) | ||
| + | * 0031UT After many calls with Brett and Randall it seems that Yg may be finally joining R1780. Manual reboot of the DBBC pc fixed some issues, but it still did not come up all peachy. Reconfiguring the DBBC twice, restting the counters with 'counter' and then running fmset seemed to clear up all the issues. Ran a pointing check and the antenna is onsource with the first planned scan being 053-0040a (Tiege) | ||
| + | * 0046UT First scan on Yg complete, everything looks OK. (Tiege) | ||
| {{tag>}} | {{tag>}} | ||
/home/www/auscope/opswiki/data/attic/handover/r1780.1487722088.txt.gz · Last modified: 2017/02/22 00:08 by Ross Turner
Page Tools
