This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:r1782 [2017/03/06 06:16]
Warren Hankey
+++ handover:r1782 [2017/03/07 11:50]
Bryn Emptage
@@ Line 1: / Line 1: @@
+======R1782======
-= Experiment Name =
+**Hobart 12m:**
-Hobart 12m:
+Disk VSN: HART+101/8000 *do not erase existing data on disk*. Okay (Lucas).
-Disk VSN: HART+101/8000 *do not erase existing data on disk*
+Data volume at beginning: 4861 GB will have to change module then as there is 4051 GB needed.
-Data volume at beginning: 4855 GB
+    * Experiment started okay (Lucas).
+    * Hobart autocorrelations don't look right, maybe rfi? (Lucas)
-Katherine 12m:
+**Katherine 12m:**
-Disk VSN:
+Disk VSN: HOB+0021
-Data volume at beginning:
+Data volume at beginning: 2.244 GB
-Yarragadee 12m:
+  * Experiment missed scans 065-1700 and 065-1704 as dbbc was reconfigured. After that it was fine. Nothing serious just timing was off and wouldn't sync (Lucas).
+  *
-Disk VSN:
+**Yarragadee 12m:**
-Data volume at beginning:
+Disk VSN: USN-0067
+Data volume at beginning: 59.080 GB
+    * Experiment started fine (Lucas).
+    * Lost ability to read tsys again before 0600 UT - IF levels and autocorrelations are fine though (Bryn)