User Tools

Site Tools


handover:r1782

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r1782 [2017/03/06 06:18]
Warren Hankey
handover:r1782 [2017/03/07 15:01] (current)
Bryn Emptage
Line 1: Line 1:
  
-R1782+======R1782======
  
-Hobart 12m:+**Hobart 12m:**
  
-Disk VSN: HART+101/​8000 *do not erase existing data on disk*+Disk VSN: HART+101/​8000 *do not erase existing data on disk*. Okay (Lucas).
  
-Data volume at beginning: ​4855 GB+Data volume at beginning: ​4861 GB will have to change module then as there is 4051 GB needed.
  
-Katherine 12m:+    * Experiment started okay (Lucas). 
 +    * Hobart autocorrelations don't look right, maybe rfi? (Lucas)
  
-Disk VSN:+**Katherine 12m:**
  
-Data volume at beginning:+Disk VSNHOB+0021
  
-Yarragadee 12m:+Data volume at beginning2.244 GB
  
-Disk VSN:+  * Experiment missed scans 065-1700 and 065-1704 as dbbc was reconfigured. After that it was fine. Nothing serious just timing was off and wouldn'​t sync (Lucas). 
 +  * 
  
-Data volume at beginning:+**Yarragadee 12m:** 
 + 
 +Disk VSN: USN-0067 
 + 
 +Data volume at beginning: ​59.080 GB 
 + 
 +    * Experiment started fine (Lucas). 
 +    * Lost ability to read tsys again before 0600 UT - IF levels and autocorrelations are fine though (Bryn) 
 +    * 14:30UT Saw a transient step function on the autocorrelation spectra. It disappeared the next scan. This coupled with the non-existat sys temps has forced me to reconfigure the DBBC. Scans missed will be 066-1454, 066-1456, 066-1502, and 066-1504a.(Arwin) 
 +    * I checked with the yg staff, Jim is aware of the tsys problem and exp is okay to go ahead without meaningful system temps. (Arwin)
  
  
/home/www/auscope/opswiki/data/attic/handover/r1782.1488781104.txt.gz · Last modified: 2017/03/06 06:18 by Warren Hankey