User Tools

Site Tools


handover:r1982

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


r1982

Hobart 26m

Disk VSN: HOB+1011/16000/1024 | Data volume at beginning: 9374 GB

  • Experiment started ok (Prad)
  • 2242 UT syncerr_le_3 error since 1830 UT (difference was 0.35 us) (warren)
  • 2243 UT ran fmset to resync formatter/mk5 syncerr_eq_0 (w)
  • 0113 UT ERROR sc -13 setcl: formatter to FS time difference 0.5 seconds or greater (w)
  • 0349 UT ERROR sc -13 setcl: formatter to FS time difference 0.5 seconds or greater (w
  • Above example errors appear only intermittently (18 times so far) about two/three an hour (w)

Yarragadee 12m

Disk VSN: GFSC+022/8000 then HOB+0104/16000 | Data volume at beginning: 6930 GB then 0 GB

  • Experiment started OK (Prad)
  • The disk has 1070 gb remaining space while the experiment is 1460 gb worth data. We'll mostly require a disk swap approximately 17.5 hours from experiment start time(Prad)
  • Pain when R1 recording spread over two modules. Warren will stream data from new module HOB+0104 from yg to Hobart (w)
  • 1100 UT estimated time to change to 16 TB module (w)
  • 0946 UT error: mark5 probably not running. Halted schedule.The connection to mk5yg failed, rebooted from ipsyg and resynced. Resumed schedule at 0955UT. Missed-scans 019-0945b until 019-0950 (Lim).
/home/www/auscope/opswiki/data/attic/handover/r1982.1611050353.txt.gz · Last modified: 2021/01/19 09:59 by Lim Chin Chuan