User Tools

Site Tools


handover:r4650

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r4650 [2014/08/28 21:26]
David Horsley
handover:r4650 [2014/08/29 14:43] (current)
Imogen Jones
Line 10: Line 10:
 hb: hb:
  
-recording to HOB+0119 at 8692 GB.+recording to HOB+0119 ​start at 8692 GB.
  
 ke: ke:
Line 16: Line 16:
     *recording to BKG+0126 start 0 GB. Test record OK.     *recording to BKG+0126 start 0 GB. Test record OK.
     *After start channels 11, 12 looked suspect in autocorrelation.     *After start channels 11, 12 looked suspect in autocorrelation.
-    * clock jumped at 19:00. halted schedule and reconfigured dbbc at 19:03. +    * clock jumped at 19:00. halted schedule and reconfigured dbbc at 19:03. fs crashed also.  
-    *  ​fs crashed also. missed ​one scan 240-1902a. next good scan 240-1916. ​ missed scan record stop means -20 GB approx.+    * one missed scan 240-1902a. next good scan 240-1916.  ​(missed scan record stop means -20 GB approx.)
     *clock delay drifted from -0.29 us to -0.4 us around 240/20:30 and has stabilised see ke_ddiff.txt plot     *clock delay drifted from -0.29 us to -0.4 us around 240/20:30 and has stabilised see ke_ddiff.txt plot
 +    * missed scans 240-2312 and 240-2328 due to dbbc reconfig.
 +    * clock delay stable since 240-2330 (as of 240-0315)
  
 +At UT13:40 day 241, the delay difference at Katherine started to drift quite badly, had to run fmset at 13.53UT (Imogen)
  
 +For some reason, gnuplot will not plot values of ke_ddif.txt past ~11:00UT - not sure why (Imogen).
 +
 +At 14:29UT, restarted DBBC as clock drift was still occurring, ran fmset to resync dbbc and mark5. ​ Delay seems to be stable as of 14:42UT, however cannot plot the values as they do not seem to be reaching the ke_ddif.txt file.
  
 yg: yg:
  
-recording to USN-0019 start 0 GB+    *recording to USN-0019 start 0 GB 
 +    *spurious wind stow 240/21:22, antenna will not release elevation brake. Sending Jack from moblas to try handbox antenna alive 
 +    *also note anemometer cant connect to device 
 +    *schedule halted 240/21:36 
 +    *drives still inoperable at 240/23:59 
 +    *restarted for scan 241-0447
/home/www/auscope/opswiki/data/attic/handover/r4650.1409261190.txt.gz · Last modified: 2014/08/28 21:26 by David Horsley