User Tools

Site Tools


handover:r4686

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r4686 [2015/05/07 23:55]
cjordan
handover:r4686 [2015/05/08 06:55] (current)
cjordan
Line 1: Line 1:
-====== ​r1686 ======+====== ​r4686 ======
  
 **Hobart 12m:** **Hobart 12m:**
Line 9: Line 9:
  
   * 22:55 UT Windstowed, missed scans 127-2256 through 127-2306 (Ross).   * 22:55 UT Windstowed, missed scans 127-2256 through 127-2306 (Ross).
 +  * RFI signatures in autocorrelation spectra in channels X5, X7, S1, S5, S6 (slopes, peaks) (Liza) ​
  
  
Line 17: Line 18:
 Data volume at beginning: 0TB Data volume at beginning: 0TB
  
-  * 23:24:57 - mk5 module lost vsn after other module swapped. Missed scans 127-2326 through ​127-2349 (Ross).+  * 23:24:57 - mk5 module lost vsn after other module swapped, connection to mk5 was lost, module lost pointers. Power-cycled Mark5, erased last scan to restore the pointer. Missed scans 127-2323b through ​128-0034 (Ross, Liza). 
 +  * 04:57UT -- FS sowtware stopped responding at pcfske. Given it a power cycle, wasn't able to switch on, so had to call Sam at Ke.(Liza) 
 +  * 067:20UT -- pcfske is back on. Scans lost:​128-0452b (may contain valid data in the beginning though)-128-0636 (may contain some useful data though, all in between are lost) (Liza) 
 +  * RFI signatures in autocorrelation spectra in channels X6,S3, S4 (slopes, peaks) (Liza) ​
  
  
Line 26: Line 30:
  
 Data volume at beginning: 0TB Data volume at beginning: 0TB
 +  * 06:10 UT -- X-band Tsys are too low (58-65K), S-band Tsys are too high (100-192K)(Liza)
 +  * RFI signatures in autocorrelation spectra in channels X8, S1, S2, S6 (slopes, peaks) (Liza) ​
  
  
/home/www/auscope/opswiki/data/attic/handover/r4686.1431042909.txt.gz · Last modified: 2015/05/07 23:55 by cjordan