User Tools

Site Tools


handover:r4702

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
handover:r4702 [2015/08/27 19:28]
David Horsley created
handover:r4702 [2015/08/28 20:00] (current)
David Horsley
Line 8: Line 8:
  
 VSN: USN-0002 VSN: USN-0002
 +  * "​2015.240.07:​56:​48 ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts."​ Looked at delay differences,​ but they didn't seem to have jumped (before alarm -0.280us and after -0.285, -0.282 etc). Since couldn'​t see anything else wrong, Jim said we could ignore it for the moment. ​ (Anita)
 +  * 08:26:51 got that alarm again. This time seems like there is a small drift in the delay difference - keeping an eye on it (Anita)
 +  * 14:19 UT - Same alarm again. No problems as far as I could tell. (Ellen)
  
 **Yg** **Yg**
Line 14: Line 17:
  
   * 1905 UT: Windstow activated. Appears to be a misread on windy or the anemom (wind speed 9999 km/h). Reset the windyg box to bring the average windspeed back down. Misreads continued. Did cold reset on windyg. Still the occasional misread. Could be on the anemometer end (An insect on the ultrasound transducers?​).   * 1905 UT: Windstow activated. Appears to be a misread on windy or the anemom (wind speed 9999 km/h). Reset the windyg box to bring the average windspeed back down. Misreads continued. Did cold reset on windyg. Still the occasional misread. Could be on the anemometer end (An insect on the ultrasound transducers?​).
-  * Scans 239-1906b --  239-1918 ​missed+  * Scans missed: ​239-1906b --  239-1918, 239-1929, 239-1934b ​
  
  
/home/www/auscope/opswiki/data/attic/handover/r4702.1440703683.txt.gz · Last modified: 2015/08/27 19:28 by David Horsley