User Tools

Site Tools


handover:r4738

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


r4738

Hobart 12m:

Disk VSN: HOB+0047

Data volume at beginning: 0 GB

  • During the setup had the following issues (Arwin)
    1. 05:03 UT “WARNING: error m5 -900 : not while other activity”. The makr5 had frozen up and needed a reset from the internet power swtich. This was accomplished with Jim Lovel's help. (Arwin)
    2. 05:57 UT mk5=dot? respone was not_synced. Opened FMSET and synced the clocks. This gave back the nominal resposne of syncerr_eq_0. The time at the end was still greater than 5ms, in the range of 18 ms. The time kept drifting to higher and higher numbers and eventually had to get Jamie to help me. Jamie diagnosed it was the ntpq server that wasn't behaving very well (high offset) and he had to reboot the system. (Arwin)
    3. 06:58 UT The Lat_offsets were between 0.02 and 0.04. Zero'd the offsets after running fivept check, re-ran the fivept check to confirm Lat_offsets were below 0.02. (Arwin)
    4. 11:59 UT WARNING: error st -27 computer acu time difference exceeded 0.25 seconds, see value above. Wiki suggesting ignoring this error as it most likely is resulting for an ongoing etransfer?
    5. 17:02 UT Had the following error a few times: WARNING: error st -5 error return from antenna, see mbus error, ''antenna=open' fixed this.
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r4738.1462469822.txt.gz · Last modified: 2016/05/05 17:37 by Ross Turner