User Tools

Site Tools


handover:r4745

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
handover:r4745 [2016/06/23 23:05]
Ross Turner
handover:r4745 [2016/06/24 04:45]
Arwin Kahlon
Line 1: Line 1:
 ====== R4745 ====== ====== R4745 ======
  
-** Yg ** 
  
-2016.175.18:​22:​44 Total data recorded = 0.673 GB at beginning of experiment to A USN-0005/ 2000.138+** Katherine 12m **
  
-18:40UT E-control froze and couldn'​t reboot. Turns out the field system crashed. ​+Disk VSNUSN-0155
  
-19:16:44 Recording started. First good scan 175-1926b. Disk_pos gives 62.917 GB at this point. (Lucas).+Data volume at beginning??
  
-19:25:06 Eremote control has disappeared ​on the screen (like has a 'bar' ​but no 'under bit'). [This was eventually fixed by maximising eremote control]. Continuously monitoring e-remote control monitoring on ops4. (Lucas).+  * 1830 UT Katherine hasn't started yet. Getting errors about "​2016.175.18:32:07.65?ERROR m5  -23 mk5cn: error opening, mark 5 probably not running, see above for error" But I don't know how to make it run? Tried IP switching it (the mk5) off and on again but now the ssh's don't work? Internet failure? ​(Lucas).
  
 +  * 19:10 UT Ellen said that if the ssh oper@mk5ke isn't working then it is most likely the internet being down at Kath. I'll keep looking through the wiki and reach Brett and/or talk to Jesse about the issue (Lucas).
  
-** Ke **+  ​24:04 UT Jamie has fixed the mk5 problem. Finishing set up. Jamie'​s response " Mick had swapped modules and restarted the mark5 units so that we could use mk5ke for recording again, while mk5-2ke was conditioning another module. DIMino was not running on mk5-2ke, which lead to the mk5cn errors in the FS. I fixed it this morning by terminating the FS, editing /​usr2/​control/​mk5ad.ctl to use mk5ke again, and restarting the FS." ​
  
-1830 UT Katherine hasn't started yet. Getting errors about "​2016.175.18:​32:​07.65?​ERROR m5  -23 mk5cn: error opening, mark 5 probably not running, see above for error" But I don't know how to make it run? Tried IP switching it (the mk5) off and on again but now the ssh's don't work? Internet failure? (Lucas).+** Yarragadee 12m **
  
-19:10 UT Ellen said that if the ssh oper@mk5ke isn'​t ​working then it is most likely ​the internet being down at KathI'll keep looking through ​the wiki and reach Brett and/or talk to Jesse about the issue (Lucas).+Disk VSNUSN-0005/ 2000.138 
 + 
 +Data volume at beginning: 0.673 GB 
 + 
 +  * 2016.175.18:​22:​44 Total data recorded =  at beginning of experiment to A  
 + 
 +  * 18:40UT E-control froze and couldn'​t ​reboot. Turns out the field system crashed.  
 + 
 +  * 19:16:44 Recording started. First good scan 175-1926b. Disk_pos gives 62.917 GB at this point(Lucas). 
 + 
 +  * 19:25:06 Eremote control has disappeared on the screen (like has a '​bar'​ but no 'under bit'). [This was eventually fixed by maximising eremote control]. Continuously monitoring e-remote control monitoring on ops4. (Lucas).
  
-24:04 UT Jamie has fixed the mk5 problem. Finishing set up. 
  
 {{tag>}} {{tag>}}
/home/www/auscope/opswiki/data/pages/handover/r4745.txt · Last modified: 2016/06/24 18:53 by Ross Turner