User Tools

Site Tools


handover:rd1611

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
handover:rd1611 [2016/11/29 19:50]
Bryn Emptage
handover:rd1611 [2016/11/30 03:22] (current)
Bryn Emptage
Line 12: Line 12:
   * 17:50UT ERROR 5k -602 SCAN_CHECK missing bytes is not zero. Can't find reference to this on the wiki. No major alarm sounded so feel safe to wait until Jamie takes over. Non-critical?​ (Liz)   * 17:50UT ERROR 5k -602 SCAN_CHECK missing bytes is not zero. Can't find reference to this on the wiki. No major alarm sounded so feel safe to wait until Jamie takes over. Non-critical?​ (Liz)
   * 19:40UT System temps have been on the high side ~100 across all bands on and off. Some instances of major overflow in a number of bands but also long periods where they remain in an acceptable range. Monitoring for now. (Liz)   * 19:40UT System temps have been on the high side ~100 across all bands on and off. Some instances of major overflow in a number of bands but also long periods where they remain in an acceptable range. Monitoring for now. (Liz)
 +  * 21:30UT turns out system temps were high because the receiver was still on l band. now fixed (Liz)
 +  * 21:30UT ERROR 5k -602 SCAN_CHECK missing bytes is not zero. THIS IS NOT GOOD. Jamie is trying to fix now. (Liz)
 +  * 22:00-22:45 Attempted to use jive5ab 7 in2file to fix the problem, but m5test indicates the same problem in the data. Warren and Brett now investigating the connections between the mark4 rack and mark5a unit (JMc)
 +  * 23:00 No change, scan_check still reports dropped bytes. m5test indicates occasional loss or time codes/sync in recorded data using both disk_record and in2file. Continuing experiment with disk recording (JMc).
  
  
/home/www/auscope/opswiki/data/attic/handover/rd1611.1480449029.txt.gz · Last modified: 2016/11/29 19:50 by Bryn Emptage