User Tools

Site Tools


handover:rd1613

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


RD1613

HOBART 26M

Module HOB+0008/960, start position 0.000 GBs

  • Alarm went off for first scan (354-1630a) saying previous source in schedule not reached…' however the telescope was onsource when recording started? (Lucas).
  • 21:35 UT ALARM: Large difference between formatter and maser delays. Check for stability of new offset. The difference was -0.556, -0.481, -0.536, -0.525us, -0.493. So it seems stable but it is triggering the alarm it if goes over 0.5. (Lucas).
  • 22:20 UT delays around 0.6 us (Warren)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/rd1613.1482185977.txt.gz · Last modified: 2016/12/19 22:19 by Warren Hankey