User Tools

Site Tools


handover:start

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:start [2019/08/22 22:37]
Tiege McCarthy
handover:start [2021/04/21 13:49] (current)
Jasper Edwards
Line 1: Line 1:
-====== ​ ====== +====== ​AUA075 ​======
-R4908YG+
  
-Disk VSN: ...| Data volume at beginning: ... GB+**Hobart 12m**
  
-UT Experiment may have started OK but not sure due to some mishaps (sorry). (Earl)+Field system crashed - noticed at approximately 20:30 Hobart time, 10:30 UTC. Prad restarted experiment ​but Telescope was stuck in SLEW and wasn't changing elevation/​azimuth. Warren called and restarted system again. System function normal by 23:00 hobart/ 13:00 UTC. (Jasper
  
-Scan: 234-2019 ​  262 0202+319 ​  0 29 NEUTR  20:​19:​28 ​ 20:​21:​11 ​   
  
-Error with Log Monitor suggested scans prior to this may not have been missed ​(as thoughtprobably damaged by my attempts to fix the apparent issue)but I'm am only certain after this (sorry)+**All Stations ​(YgHbKe)**
- +
-20:21 Re-syncronisation of mk5 and ddbc via fmset +
- +
-22:36 Auto-correlation shows issues in channels 12 and 13. +
- +
-~~DISCUSSION~~+
  
 +- Some of the checklists for stations had error comments made on them (when none was necessary) since operator was not aware of the idiosyncrasies of station systems. Warren overviewed systems and deemed them functional and satisfactory. (Jasper)
/home/www/auscope/opswiki/data/attic/handover/start.1566513458.txt.gz · Last modified: 2019/08/22 22:37 by Tiege McCarthy