User Tools

Site Tools


hardware:dbbc

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Documentation

DBBC Configuration

* Conditioning Module Status

Supplied 1PPS and 10 MHz reference, using the cables previously connected to the SRTP2 system. BNC→SMA adaptors were used to make the connection.

Booted into Windows from the onboard PC, configured the network settings to IP 131.217.63.164, NM 255.255.255.128, GW 131.217.63.129. Used “System” in control panel to change computer name (to dbbchb) & DNS lookup to phys.utas.edu.au.

Ran “DBBC control”, answered “y” to reconfiguration. Sampling modules were re-initialised and resumed processing with the 1PPS sync.

DBBC 3rd Party Utilities & Software

Recording Configuration DBBC And Mark5B+

Linux OS Installation

Installation on a Compact Flash Card

DBBC Power Measurement

Commercial Boards used in the DBBC

Related Links

TOW 2011

DBBC3

/home/www/auscope/opswiki/data/attic/hardware/dbbc.1333052903.txt.gz · Last modified: 2012/03/29 20:28 by Stuart Weston