hardware:dbbc.calibration

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

DBBC Calibration

Apply a tone of 764 MHz at -15 dBm to one input 1 of all four CoMos
Set dbbc_config_file.txt to be dbbc_control_file_calibration.txt
Start DBBC Control.exe
Set dbbcifa/b/c/d=1,agc,1 (i.e. input 1, filter 1)
Run “calibration” in DBBC Control
The results are written to C:\ as yyyy-ddddThhmmss-calib.txt

/home/www/auscope/opswiki/data/attic/hardware/dbbc.calibration.1319611032.txt.gz · Last modified: 2013/01/29 22:33 (external edit)