This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

DBBC Calibration

Apply a tone of 764 MHz at -15 dBm to one input 1 of all four CoMos
Set dbbc_config_file.txt to be dbbc_control_file_calibration.txt
Start DBBC Control.exe
Set dbbcifa/b/c/d=3,agc,1 (i.e. input 3, filter 1)
Run “calibration” in DBBC Control
The results are written to C:\ as yyyy-ddddThhmmss-calib.txt
The file has 5 columds: phase, CoMo A/B/C/D value. Pick the phase at the null past the first peak.