User Tools
hardware:flexbuff
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
hardware:flexbuff [2018/07/02 05:04] Warren Hankey |
hardware:flexbuff [2019/05/22 00:52] (current) Warren Hankey [2018 Version] |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| * When installing debian (stretch), if you need to create a new partition table for the OS disks do not use GPT - this (when combined with RAID) is incompatible with setting the bootable flag and/or installing grub. Use a DOS partition table, mark as for linux RAID & bootable, install the OS to the software RAID and install grub to one or both SSDs. | * When installing debian (stretch), if you need to create a new partition table for the OS disks do not use GPT - this (when combined with RAID) is incompatible with setting the bootable flag and/or installing grub. Use a DOS partition table, mark as for linux RAID & bootable, install the OS to the software RAID and install grub to one or both SSDs. | ||
| * In the main BIOS, make sure that the HDD boot priority is set to use the SSDs rather than the megaRAID drives. | * In the main BIOS, make sure that the HDD boot priority is set to use the SSDs rather than the megaRAID drives. | ||
| - | * After installing debian, edit /etc/apt/sources.list to use "main contrib non-free" sources throughout. Run ''apt-get update'' and then ''apt-get install libfuse-dev emacs nfs-kernel-server tightvncserver libfftw3-dev python iftop iotop wireshark make automake build-essential gfortran x11vnc nfs-kernel-server nfs-common gparted pkg-config g++ gfortran bison flex libexpat1-dev fftw3-dev autoconf automake libtool build-essential pgplot5 subversion libopenmpi-dev openmpi-bin rpcbind ethtool libpng-dev libx11-dev mlocate bc dnsutils rsync'' | + | * After installing debian, edit /etc/apt/sources.list to use "main contrib non-free" sources throughout. Run ''apt-get update'' and then ''apt-get install libfuse-dev emacs nfs-kernel-server tightvncserver libfftw3-dev python iftop iotop wireshark make automake build-essential gfortran x11vnc nfs-kernel-server nfs-common gparted ntp ntpdate pkg-config g++ gfortran bison flex libexpat1-dev fftw3-dev autoconf automake libtool build-essential pgplot5 subversion libopenmpi-dev gv openmpi-bin rpcbind ethtool libpng-dev libx11-dev mlocate bc dnsutils rsync xfsprogs ghostscript-x libgsl0-dev'' |
| * This should build in the pre-requisites for DiFX, fourfit, jive5ab, etc. | * This should build in the pre-requisites for DiFX, fourfit, jive5ab, etc. | ||
| Line 21: | Line 21: | ||
| net.ipv4.conf.all.arp_filter = 1 | net.ipv4.conf.all.arp_filter = 1 | ||
| net.core.netdev_max_backlog = 20971752 | net.core.netdev_max_backlog = 20971752 | ||
| - | net.ipv4.udp_mem = "65536 131072 262144" | + | net.ipv4.udp_mem = 65536 131072 262144 |
| net.core.optmem_max = 50331648 | net.core.optmem_max = 50331648 | ||
| vfs_cache_pressure = 50 | vfs_cache_pressure = 50 | ||
| Line 44: | Line 44: | ||
| * export PATH=${DIFXROOT}/bin:${PATH} | * export PATH=${DIFXROOT}/bin:${PATH} | ||
| * export HOPS_QUIET=1 | * export HOPS_QUIET=1 | ||
| - | * . hops-3.18/hops.bash | + | * . HOPS/hops-3.18/hops.bash |
| * export PGPLOT_DEV="/xs" | * export PGPLOT_DEV="/xs" | ||
| * export HOPS_STATION_CODE=/home/observer/hops_station_code.txt | * export HOPS_STATION_CODE=/home/observer/hops_station_code.txt | ||
| * export DEF_CONTROL=~/cf_def | * export DEF_CONTROL=~/cf_def | ||
/home/www/auscope/opswiki/data/attic/hardware/flexbuff.1530507872.txt.gz · Last modified: 2018/07/02 05:04 by Warren Hankey
Page Tools
