User Tools

Site Tools


hardware:mark5.conditioning

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
hardware:mark5.conditioning [2012/09/05 05:15]
Moblas people
hardware:mark5.conditioning [2012/09/05 05:22] (current)
Moblas people
Line 2: Line 2:
 Conditioning performs a read/write cycle over the set of disks and identifies and isolates bad sectors. Conditioning performs a read/write cycle over the set of disks and identifies and isolates bad sectors.
  
-To Condition a module:+**__To ​Condition a module:__**
  
-Place the module in Bank A **leaving ​Bank B empty or unlocked**.+Place the module in Bank A **(Leave ​Bank B empty or unlocked)**.
  
 On a terminal window on the ops1xx pc enter: <​code>​ On a terminal window on the ops1xx pc enter: <​code>​
Line 18: Line 18:
 After many seconds, you should see the program output its first line of info. After many seconds, you should see the program output its first line of info.
  
-When the routine completes , it will say how many seconds it took - **note this to write on the side of the module**. Ensure the time taken is close to normal for that size module - if it is radically different - try conditioning the module again.+When the routine completes , it will say how many seconds it took - **note thisto write on the side of the module**. Ensure the time taken is close to normal for that size module - if it is radically different - try conditioning the module ​again. 
 + 
 +If the script gets in a real tangle, you can usually ctrl-c it and then reset the Mark5 with: <​code>​ SSReset </​code>​ and try again.
  
 It is a good idea to do some [[hardware:​mark5.conditioning.postconchecks | post conditioning checks]] It is a good idea to do some [[hardware:​mark5.conditioning.postconchecks | post conditioning checks]]
  
 Mark5B manual is here : http://​www.haystack.mit.edu/​tech/​vlbi/​mark5/​docs/​Mark%205B%20users%20manual.pdf Mark5B manual is here : http://​www.haystack.mit.edu/​tech/​vlbi/​mark5/​docs/​Mark%205B%20users%20manual.pdf
/home/www/auscope/opswiki/data/attic/hardware/mark5.conditioning.1346822155.txt.gz · Last modified: 2012/09/05 05:15 by Moblas people