This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
observing:hohb [2016/10/21 20:41] Jamie McCallum |
observing:hohb [2016/11/02 23:57] (current) Bryn Emptage |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | The latest series of HOB experiments are using X-band for observations on the Hobart12-Hobart26 baseline. To get the best sensitivity we are using the DBBC for Hobart26, rather than the mark4 rack. We use the S/X receiver on the 26m. | ||
+ | |||
+ | ====== Hobart12m ====== | ||
+ | |||
+ | Drudg the experiment file as normal, but please note that you will need to run ''setupxx'' rather than ''setupsx''. Only 8 IFs are being monitored in caltsys (BBCs 1-8, but both USB and LSB channels) and the autocorrelations will appear differently (with the second 8 channels having reversed shapes to the first 8). | ||
+ | |||
====== Hobart26m ====== | ====== Hobart26m ====== | ||
Line 5: | Line 11: | ||
* **DO NOT RUN SLOGIT!** This script assumes that you are using the mark4 backend and will create an unusable proc file! Instead, run drudg directly. As ''oper@hobart'' | * **DO NOT RUN SLOGIT!** This script assumes that you are using the mark4 backend and will create an unusable proc file! Instead, run drudg directly. As ''oper@hobart'' | ||
- ''cd /usr2/sched/'' | - ''cd /usr2/sched/'' | ||
- | - ''scp oper@pcfshb:/usr2/sched/hob006.skd /usr2/sched/@@ | + | - ''scp oper@pcfshb:/usr2/sched/hob006.skd /usr2/sched/'' |
- ''drudg hob006.skd'' | - ''drudg hob006.skd'' | ||
- Check equipment with option ''11'' - it should be set to DBBC and Mark5B for the rack and recorder. | - Check equipment with option ''11'' - it should be set to DBBC and Mark5B for the rack and recorder. | ||
- | - Return to the main menu and produce a proc file with ''12' and snap file with ''3'' | + | - Return to the main menu and produce a proc file with ''12'' and snap file with ''3'' |
- Copy a previous experiments proc file across to current experiment (these are fairly heavily customised at the moment) with ''cp /usr2/proc/hob005ho.prc /usr2/proc/hob006ho.prc'' | - Copy a previous experiments proc file across to current experiment (these are fairly heavily customised at the moment) with ''cp /usr2/proc/hob005ho.prc /usr2/proc/hob006ho.prc'' | ||
* On ''hobart'', terminate the FS and then run the following commands: | * On ''hobart'', terminate the FS and then run the following commands: |