This is an old revision of the document!
The Hobart26m uses the DBBC backend for these experiments rather than the mk5 rack. Unfortunately, the FS only supports controlling one “rack” at a time, so you need to edit configuration files and restart the FS to swap between the backends. There are some instructions included below.
scp oper@pcfshb:/usr2/sched/hob006.skd /usr2/sched/
11- it should be set to DBBC and Mark5B for the rack and recorder.
12and snap file with
cp /usr2/proc/hob005ho.prc /usr2/proc/hob006ho.prc
hobart, terminate the FS and then run the following commands:
cp /usr2/control/mk5ad.mk5ho.ctl /usr2/control/mk5ad.ctl
cp /usr2/control/equip.dbbc2.1gbps.ctl /usr2/control/equip.ctl
fsand then check that the correct mark5 is selected with
mk5=dot?- this should return a “normal” response, as for the AuScope antennas.