User Tools

Site Tools


operations:26mdrives

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:26mdrives [2016/08/18 01:57]
Lucas Hyland
operations:26mdrives [2017/05/01 16:06] (current)
Arwin Kahlon
Line 1: Line 1:
-=== HOW TO RE-START DRIVES ===+=== HOW TO MANUALLY ​RE-START ​26M DRIVES === 
 + 
 +**Last ditch remote attempt** 
 + 
 +Before trying the manual re-start it is advisable to try the remote reset via the v-desk terminal on newsmerd. 
 +  * ''​vncviewer newsmerd:​1''​ 
 +  * open a terminal and type ''​vdesk''​ 
 +  * In the vdesk terminal type ''​drvon''​ 
 +  * In the vdesk terminal type ''​slew''​. The antenna position should change to 0 for both X and Y on the drive control panel near the back door (swivel the webcam to confirm this). If this happens, the drives are operational and try your normal setup. If nothing happens continue with the next steps 
 +  * In the vdesk terminal type ''​drvoff''​ 
 +  * In the vdesk terminal type ''​abort''​ 
 +  * In the vdesk terminal type ''​drvon''​ 
 +  * In the vdesk terminal type ''​slew''​The antenna position should change to 0 for both X and Y on the drive control panel near the back door (swivel the webcam to confirm this). If this happens, the drives are operational and try your normal setup. You can make it stow again by typing ''​park''​. If nothing happens, panic a little, you'll probably need to go out to the site and do the manual reset listed below might be worth calling the on-call person or Brett for help. 
 + 
 +**Manual Reset** 
 + 
 +If the antenna'​s drives get stuck, then the drives may need to manually restarted up at Mt P.
  
     * TURN KEY CLOCKWISE TO ‘JOYSTICK’     * TURN KEY CLOCKWISE TO ‘JOYSTICK’
Line 6: Line 22:
     * GO TO NEWSMERD DESK (in main control room, near door to bedroom and toilet)     * GO TO NEWSMERD DESK (in main control room, near door to bedroom and toilet)
     * LOOK FOR ICON (looks like little gear, maybe top right of right most screen) CALLED VDESK     * LOOK FOR ICON (looks like little gear, maybe top right of right most screen) CALLED VDESK
-    * OPEN IT AND TYPE ‘abort’ ​ THEN enter. THEN AGAIN TYPE ‘abort’ ​ THEN enter. THIS WILL KILL ALL ACTIVITY.+    * (#) OPEN IT AND TYPE ‘abort’ ​ THEN enter. THEN AGAIN TYPE ‘abort’ ​ THEN enter. THIS WILL KILL ALL ACTIVITY.
     * NOW TYPE ‘drvon’ enter (drive-on).     * NOW TYPE ‘drvon’ enter (drive-on).
 +    * TURN KEY FROM '​JOYSTICK'​ TO '​CPU'​.
 +    * ON VDESK, TYPE '​drvon'​ enter.
 +    * THE LEDS FOR 'X DRIVE ON' AND 'Y DRIVE ON' SHOULD BE LIT UP AND THE 'X BRAKES OFF' AND 'Y BRAKES OFF' (which were previously off) SHOULD BE ON.
 +
 +    * **IF THESE 4 LIGHTS ARE NOT ON, TRY ANOTHER '​drvon',​ OR REPEAT FROM (#). DO NOT TRY AND SLEW THE TELESCOPE UNTIL THESE LIGHTS ARE ON OTHERWISE YOU WILL NEED TO RESTART. **
  
 +    * TRY A SLEW COMMAND IN NEWSMERD (like '​southpole'​). IF IT DOES NOT WORK REPEAT.
 +    * IF YOU GET ANY LIGHTS OR ALARMS DURING, you can silence them bu hitting the little button below the red light on the drive control. The alarms can be turned off in a newsmerd terminal by typing '​alarmoff'​.
  
 +{{ :​operations:​antenna_drive_control.png |}}
  
  
/home/www/auscope/opswiki/data/attic/operations/26mdrives.1471485421.txt.gz · Last modified: 2016/08/18 01:57 by Lucas Hyland