User Tools

Site Tools


operations:agenda2016_07_21

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:agenda2016_07_21 [2016/07/20 13:24]
Ross Turner
operations:agenda2016_07_21 [2016/07/21 02:31] (current)
Ross Turner
Line 1: Line 1:
-**Chair/​Presenting:​** Ross/Ellen+**Chair/​Presenting:​** Ross
  
-**Attendees:​** Jonny, Ellen, Nick, Lucas, Lucia, Jim, Jamie, Bryn, Arwin, ​+**Attendees:​** ​ 
 +Nick, Jamie, Liz, Jonny, Tiege, Ellen, Lucia, Jim, Jesse
  
 **Not Attending:​** ​ **Not Attending:​** ​
 +Lucas, Arwin
  
 **General Issues:** **General Issues:**
-  * Progress of Hobart ​12m receiver upgrade+  * New time? 
-       - Receiver fitted, howeverbad weather is delaying testing, hopefully finished towards the end of the month+    * Doodle poll 
-  * Lots of emails going around about Yg elevation brake, anything ​observers ​need to worry about? +  * Hobart ​26m wind stowing or being stowed after Jim's observations,​ requires a manual reset an a trip to Mt Pleasant
-       - Keep an eye on telescope moving correctly, not much we can do but get in touch with Yg staff+    * Send to track to something elsee.g. South pole? 
-  * Are the web cams all up and running properly again. +    * Don't stow antenna at end
-       - Hobart 12m all sky currently broken still+    * Tell Jim P not to stow antenna 
-  Down to 2 screens at Mt Pleasant ​for observing computer+    * Go to antenna if windy?? ​ 
-  * Missing log files  +  * Organising Modules; need a way of informing ​observers ​which module ​to use. 
-       - Make sure that they have been uploaded when you send the end of experiment emails. +    * r1 come to Hobartr4 go Washington from yg and ke. r1 and r4 not on same module. 
-  ​Yg humidity sensor is reading 0 constantly, Ke temperature in system monitor not working correctly. +    * Going to a different place, put on a different module (in general). 
-  To restore all desktop icons, open up Places (up the top), and then select Desktop.+    * Warren puts module in, can he write on handover notes which experiment it's for
 +  * Night-time observations (what is expected as an observer and what is safe?): 
 +     * Completing check lists, verifying experiment started and handing over. See the new [[operations:​observerduties|Observer Duties ​and Shift Times]] section in [[operations:​documentation_ops2_pcfs9.10.5plus|Operator Documentation for observations]] 
 +     ​Driving cars out to Mt Pleasant. 
 +  * Lounge fit out 
 +     ​Speakers? 
 +     ​Do not disturb sign? 
  
 **Issues taken from handover notes** **Issues taken from handover notes**
-  * Don't stow the 26m after observations,​ can often require a manual reset requiring a trip to the Mt Pleasant. +  * eRemote Control freezing
-      - Stowing the dish turns the drives off, and they sometimes don't come back on easily+  * Recording to wrong modules; and recording to malfunctioning modules
-  * Potentially eRemoteControl having some issues staying connected(I see mention of this in handover notes) + 
-      - 26m eEemoteControl is crashing constantly. +**Action item** 
-      - Katherine is also having some issues, often losing connection (~every 10 seconds). +  * Discuss with Warren etc. about listing which module to record to.
-      - This could be being caused by general UTAS networking issues (does not explain 26m issues).+
/home/www/auscope/opswiki/data/attic/operations/agenda2016_07_21.1469021042.txt.gz · Last modified: 2016/07/20 13:24 by Ross Turner