User Tools

Site Tools


operations:agenda2017_08_03

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:agenda2017_08_03 [2017/08/03 03:23]
Ross Turner
operations:agenda2017_08_03 [2017/08/17 03:32] (current)
Elizabeth Iles
Line 1: Line 1:
-=======Meeting ​3rd August=======+=======Meeting ​18th August=======
  
-Chair: ​Ross+Chair: ​Liz
  
-Present: ​Jamie, ​Tiege, ​ElleBryn, Patrick, ​JonnyMasLucas+Present: Tiege, ​JonnyRoss, Mas, Patrick, ​BrynJamieLucia
  
-Apologies: ​Lucia, Liz, Arwin+Apologies: ​Lucas
  
-Absent: Jesse+Absent: ​Arwin, ​Jesse
  
 General Issues: General Issues:
  
-  * When is the meeting? Arwin can'​t ​do now, everyone else canHe also can'​t ​make the Doodle poll timeMeeting at same time for now, Arwin can read notes and send comments ​in. +  * Ho camera doesn'​t ​slew to the stuff in the drop down menuAgain broken. Don'​t ​scroll too excitedlySomeone ​can manually move it to fix. A persistent offset ​in x.  
-  * Bryn has bought stuffLong life milk lasts a long time. Coffee lasts technically 20 years. Let Brett know about this. +  * Email redata transfer rd experiments not doneWarren! 
-     * Can buy chocolate using money from jar; get cheap stuff+  * Mid-sem break proposed meeting ​for ArwinBut too many people ​will be away so maybe not. Stay with how it is. But for Arwin and others who can't make meeting: update meeting notes pre meeting with any issues they want discussed
-  * Hobart 12m back up in over a month. +
-  * LBA? If you are on shift you are also doing LBA. Shifts are generally 8am to 8pm or 8pm to 8am. Schedules are out, fewer panics this time says Jamie. Going through Mark5 at Hobart and Ceduna. Katherine and Yarragadee in for X band partsLBA pointings still off by a little bit; check in field system or monit2. Mark5 monitoring ​will soon be through the LBA page, but not for this session. Starts at 6GHz then goes to 3cm, single receiver change.+
  
 Handover Issues: Handover Issues:
    
-  * r1803/yg - antenna locked up after pointing check in stow position+  * Ho26m * aua024 illegal sample rate? can fix by loading the procedure file for aua022. Should we really be doing this though... BUT do it after schedule=!!! Yes, correct thing to fix. But should be fixed in the scheduling stage not observing anyway. Strange formatter thing...  
-  crds89/yg - elevation drives stuck; reset needed+ 
-  ​* apsg40/yg - antenna drives stuck +          ​20K not reporting properly started on crds90... Nothing was on fire. But is ongoing and potentially the diode is having issues and giving non real values.Not high priority fix so keep an eye on it
-  Antenna drive issues two more times but before start of experiment. Randal just pushed the button, estopForgot to unpush ​the estop buttonShows as red in HMI+   
-     ​Type too many commands after stowing ​it can lock upgive 30 second between commands?? Maybe only when drives going from off to on. +          Moduleson both aua024 and crds90 Warren put a module in the wrong placeIs okayConfusion is a problem but should be better when we make full transition to new stuff.  
-     ​Can we get an IP switch ​to press estop button+ 
-  * crds89/ho - wrong equip.ctl files+          rxp reports wrong values again.Also on live page. If you change receivers ​it worksand panel is fine. But drive pc issue where it doesn'​t get correct information. Hopefully a reboot will fix, will do asap.  
 + 
 +  * Yg * R4804 MasAntenna stuckTried to fix, and onsite person tried to fix. But just decided to work when it wanted. But Yg people have put in a temporary fix on Monday which may make the brake problem better. No problems were reported for r1 so can guess it is fixed (for now).  
 + 
 +       R4804 Network connection ​to maser. This is all okayVnc had an issue we thing. Maser seemed fine. Seems that a bad connection reports as battery power or something.Follow up with Brett is forthcoming.  
 + 
 +  * Ke * R1804 drives stuck but fixed by reboot. Is this important? probably a power glitch but check that antenna=open. And reset drives in HMI but didn't work just from antenna=open. Seems okay..
/home/www/auscope/opswiki/data/attic/operations/agenda2017_08_03.1501730618.txt.gz · Last modified: 2017/08/03 03:23 by Ross Turner