User Tools

Site Tools


operations:agenda2017_11_09

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:agenda2017_11_09 [2017/11/09 02:12]
Ross Turner
operations:agenda2017_11_09 [2017/11/09 02:24] (current)
Ross Turner
Line 10: Line 10:
  
 General Issues: General Issues:
 +   - Calendar didn't include Hobart even though it was on the master schedule. The 26m was a late addition to the AUA schedule. Should be avoided in future.
 +      - Let Jamie know if you don't have access rights to the calendar.
 +      - nobs looks at master schedule. Warren'​s script already checks master schedule.
 +      - CHECK THE MASTER SCHEDULE! and the start time.
 +  - Jesse sent around an email about script. Works for ho, hb, ke and yg, and opens most of the windows needed.
 +      - didn't put delay plots in the right position; this is because they were already open.
 +      - run windex before windows if there is stuff open.
  
 Handover Issues: Handover Issues:
Line 18: Line 25:
      - Just summer maybe. Also receiver pressure a bit dodgy, at 4 microns. Build of gases, got over 5 microns last night but was pumped down. Summer season so cryo problems likely to be more of an issue. Keep an eye out.      - Just summer maybe. Also receiver pressure a bit dodgy, at 4 microns. Build of gases, got over 5 microns last night but was pumped down. Summer season so cryo problems likely to be more of an issue. Keep an eye out.
   - Ke: Ran fivept several times, the offsets are looking a bit dodgy (AUA031)   - Ke: Ran fivept several times, the offsets are looking a bit dodgy (AUA031)
 +     - Problem after bad storms in Katherine. Bryn could get below 0.04 offset even after several attempts. Jamie to work on this.
 +     - Similarly, fringe testing is quite rubbish these days.
   - Yg: alarms going off for illegal state error and unable to read systemclock1. antenna=open antenna=operate fixed the issue (R1816)   - Yg: alarms going off for illegal state error and unable to read systemclock1. antenna=open antenna=operate fixed the issue (R1816)
 +     - Bryn breaks stuff. This issue has come up for both Tiege and Liz too. HMI clock get confused about the time; need to reset if the simple fix fails. ​
/home/www/auscope/opswiki/data/attic/operations/agenda2017_11_09.1510193533.txt.gz · Last modified: 2017/11/09 02:12 by Ross Turner