This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

---

Chair: Atifur

Attended:

Apologies:

Absent:

General Issues

Hobart 26: Formatter to FS time 0.5s or greater.
 

Handover Issues

AOV029: Hb26:
  Started fs-mk5hb on pcfshb, still is running there. mk5hb required a reboot too.
  Started successfully 17:50 UT, first scan 326-1746 then more or less immediately windstowed and had been in windstow since (currently 20:00 UT). Cryo is fine, cannot check psup - Lucas.
  Delays are weirdly high (~8us but visibly stable in delaylive). fmset reports no offset and mk5=dot is happy - Lucas.
  Wind stow released 326-2041, all sources between 326-1811 and this missed - Lucas
  Scan 326-2208 missed after halting schedule - mistook the receiver p0sition as incorrect (JMc)
  04:11 Wind stow. missed scans from 327-0411 to 327-0606 (W)
  05:52 UT Wind stow released, start recording again from 327-0606 (W)
  
  R1869: Yg12:
  03:32 Too many “mk5cn time out” errors restart mark5 recorder (warren)
  03:47 DIMino crash? restart Dimino (warren)

  OHG116: Ke12:
  0959 UT WARNING: error ib -402 gpib(enol) write handshake error, check instrument and cable, w1 (Lim)