User Tools

Site Tools


operations:agenda2019_05_16

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Chair: Lim

Attended:

Apologies:

Absent:

General Issues

  • Please remember to create handover note page during setup.
  • No connection to Yg and Hb maser.

Handover Issues

R4892:

  • Handover note created without experiment name.
  • “Experiment started” information not provided.
  • Data volume at beginning not specified.

CRD102:

  • Ho: 1307UT - fmset puts the field system time 6.2 seconds ahead of the Mark5 and Computer time, this seems to result in scans ending (and starting) ~5 seconds ahead of schedule (when going off the log time). We are in the last 50 mins of the experiment so I am going to leave as is rather than spend 25 mins restarting machines and end up losing more data than would be (potentially) saved. (Tiege)

R1894:

  • Yg: pcfsyg disk filled up 15 minutes before experiment started. Needed to remove some old epi/png files from the auto_corr_test directory. (Tiege)

AOV035:

  • Ho: 1725UT - Cryo monitoring system not working at Ho (ERROR ma -4 Device rx timed-out on response). I have replaced the cryomon and rxmon procedures with nops in EXPERIMENT procedure library for the time being, because otherwise it waits for each rx measurement to time out. I have also commented out the rxmon command in the midob procedure in STATION library, as that is also waiting for timeout, and screwing up scan timing. (Patrick)
    • Fixed by resetting TTY distributor with “reset” switch on old S/X MarkIV rack. Serial communications from Hobart to s/x receiver are still patched through this rack. (Warren and Brett)
  • 1725UT - wx command not working. (Patrick)
/home/www/auscope/opswiki/data/attic/operations/agenda2019_05_16.1557967025.txt.gz · Last modified: 2019/05/16 00:37 by Lim Chin Chuan