User Tools

Site Tools


operations:agenda2019_05_16

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:agenda2019_05_16 [2019/05/16 02:46]
Lim Chin Chuan
operations:agenda2019_05_16 [2019/05/16 03:14] (current)
Lim Chin Chuan
Line 1: Line 1:
 **Chair:** Lim **Chair:** Lim
  
-**Attended:​** ​+**Attended:​** ​Momtaz Simin, Mas, Tiege, Patrick, Jamie, Katie
  
 **Apologies:​** Ross, Earl, Jay, Lucas **Apologies:​** Ross, Earl, Jay, Lucas
Line 12: Line 12:
     * Please remember to create handover note page during setup.     * Please remember to create handover note page during setup.
     * No connection to Yg and Hb maser.     * No connection to Yg and Hb maser.
 +    * Go to pcfs terminate the e remote control and restart if cannot connect.
 +    * End message, if problem exists, please mention/​describe the error. ​
  
 **Handover Issues** **Handover Issues**
Line 23: Line 25:
 CRD102: CRD102:
    * Ho: 1307UT - fmset puts the field system time 6.2 seconds ahead of the Mark5 and Computer time, this seems to result in scans ending (and starting) ~5 seconds ahead of schedule (when going off the log time). We are in the last 50 mins of the experiment so I am going to leave as is rather than spend 25 mins restarting machines and end up losing more data than would be (potentially) saved. (Tiege)    * Ho: 1307UT - fmset puts the field system time 6.2 seconds ahead of the Mark5 and Computer time, this seems to result in scans ending (and starting) ~5 seconds ahead of schedule (when going off the log time). We are in the last 50 mins of the experiment so I am going to leave as is rather than spend 25 mins restarting machines and end up losing more data than would be (potentially) saved. (Tiege)
-     ​* ​+     ​* ​on going issue. Jamie will solve it tomorrow. Get the 26m to log the time difference
  
 R1894: R1894:
    * Yg: pcfsyg disk filled up 15 minutes before experiment started. Needed to remove some old epi/png files from the auto_corr_test directory. (Tiege)    * Yg: pcfsyg disk filled up 15 minutes before experiment started. Needed to remove some old epi/png files from the auto_corr_test directory. (Tiege)
-     ​* ​+     ​* ​Cronjob to clean up directory everyday 
 +     * New machine coming in a few months with new system. 
 +     * Might still need to use the old system.
  
 AOV035: AOV035:
Line 33: Line 37:
      * Fixed by resetting TTY distributor with “reset” switch on old S/X MarkIV rack. Serial communications from Hobart to s/x receiver are still patched through this rack. (Warren and Brett)      * Fixed by resetting TTY distributor with “reset” switch on old S/X MarkIV rack. Serial communications from Hobart to s/x receiver are still patched through this rack. (Warren and Brett)
    * 1725UT - wx command not working. (Patrick)    * 1725UT - wx command not working. (Patrick)
 +     * Path failure. ​
 +     * Ups failed (lost power)
 +     * Working now.
/home/www/auscope/opswiki/data/attic/operations/agenda2019_05_16.1557974803.txt.gz · Last modified: 2019/05/16 02:46 by Lim Chin Chuan