This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Chair: Lim

Next meeting chair: Simin

Attended: Mas, Katie, Guifre, Jamie, Earl, Prad, Jay

Apologies:

General Issues

• Ho26 S/X receiver sensitivity issue solved after LNA Power supply repair. Nominal temperature reading again. Cryo issue now.
• Note: Brett on leave, Warren on its own now at Mt Pleasant.

Handover Issues

• r1974
  • Ho26: maserhb seems to be down (Simin)
  • Computer runs the software has failed. (windows 7 image, can clone the drive, somehow.. Cannot monitoring the maser yet at the moment)
• crd109
  • Ho26: errors“ Delay trough DBBC has changed. Monitor for stability and reset DBBC if it drifts” (Mas)
  • Lost sync through dbbc, power cycle seems to have solved it. PRC file wasn't calling the monitoring command, seems to be commented out. pps_delay slips while the fmset looks correct, not sure what issue there is.