User Tools
operations:aum-hb
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:aum-hb [2021/03/03 23:59] Warren Hankey |
operations:aum-hb [2021/04/27 05:13] (current) Pradyumna Kiran Kummamuru |
||
|---|---|---|---|
| Line 16: | Line 16: | ||
| <code> | <code> | ||
| cd /usr2/sched | cd /usr2/sched | ||
| - | wget ftp://cddis.gsfc.nasa.gov/vlbi/ivsdata/aux/2021/aum028/aua028.skd | + | wget ftp://ivs.bkg.bund.de/pub/vlbi/ivsdata/aux/2021/aum028/aum028.skd |
| drudg aum028.skd | drudg aum028.skd | ||
| hb (station) | hb (station) | ||
| Line 49: | Line 49: | ||
| * You can make a test recording to check for synchrnoisation problems between the different DBBCs with ''~/bin/sxtimetest.sh'' which will print out the decoded time of the start of the test recording. All three values should agree and match the time reported in the FS log for when the "record=on" command was issued. If the times differ between the different datastreams, you will need to reconfigure the relevant DBBCs. If they are all in agreement but differ from the FS log, please note this difference in the log but proceed on to the next step. | * You can make a test recording to check for synchrnoisation problems between the different DBBCs with ''~/bin/sxtimetest.sh'' which will print out the decoded time of the start of the test recording. All three values should agree and match the time reported in the FS log for when the "record=on" command was issued. If the times differ between the different datastreams, you will need to reconfigure the relevant DBBCs. If they are all in agreement but differ from the FS log, please note this difference in the log but proceed on to the next step. | ||
| * Set the log file for the experiment with ''log=aum018hb'' | * Set the log file for the experiment with ''log=aum018hb'' | ||
| - | * Load the schedule file with ''sched=aum018hb,#1'' | + | * Load the schedule file with ''schedule=aum018hb,#1'' |
| == Setting up for Yg == | == Setting up for Yg == | ||
/home/www/auscope/opswiki/data/attic/operations/aum-hb.1614815946.txt.gz · Last modified: 2021/03/03 23:59 by Warren Hankey
Page Tools
