User Tools

Site Tools


operations:cont14_observatory_check

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
operations:cont14_observatory_check [2014/05/12 05:19]
David Horsley [26m antenna Checkout Procedure]
operations:cont14_observatory_check [2014/05/16 04:46]
David Horsley [26m antenna Checkout Procedure]
Line 61: Line 61:
  
   - check the receiver position with ''​rxp''​. Should be -256, +248, +18 (x,​y,​z) ​   - check the receiver position with ''​rxp''​. Should be -256, +248, +18 (x,​y,​z) ​
-  - Use the remote controllable camera [[http://​ptzhb.phys.utas.edu.au|ptzhb]] to view the MarkIV rack for some of the next steps.+  - Use the remote controllable camera [[http://​ptzhb.phys.utas.edu.au|ptzhb]] to view the MarkIV rack for some of the next steps. ​(If it does not work with Chrome, try switching to Firefox)
   - Check all the Video Converters (VCs, or BBCs) are happy, ie no red lights and no nasty messages appearing in the log. Command ''​valarm''​ will turn off any remaining alarm lights on the VCs.   - Check all the Video Converters (VCs, or BBCs) are happy, ie no red lights and no nasty messages appearing in the log. Command ''​valarm''​ will turn off any remaining alarm lights on the VCs.
   - Chronic errors that can be ignored can be silenced with:<​code>​check=*,​-vf   - Chronic errors that can be ignored can be silenced with:<​code>​check=*,​-vf
/home/www/auscope/opswiki/data/pages/operations/cont14_observatory_check.txt · Last modified: 2014/05/16 05:04 by David Horsley