User Tools

Site Tools


operations:currentissues

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:currentissues [2016/08/08 23:10]
Jim Lovell [Humidity monitor at Yarragadee]
operations:currentissues [2018/06/19 01:38] (current)
Tiege McCarthy
Line 1: Line 1:
 ====== Current Issues ====== ====== Current Issues ======
 +
 +
 +===== Yarragadee Maser VNC Not Working =====
 +
 +** Symptom **
 +  * VNC for maser pc is not working from the drop-down menu
 +  * Manually attempting to VNC to the maser pc returns some form of unreachable message
 +
 +** Solution **
 +  * Contact staff at Yg and ask them if they can reboot the maser pc
 +  * Once the pc comes back online, it should now be reachable by VNC
 +  * Start maser server software, top right corner on Desktop
 +  * Start maser management software (and check everything is still nice and green)
 +
 +===== Yarragadee IF rack =====
 +
 +The PIC in the IF rack at Yg has a problem that prevents diode switching and hence Tsys measurements. The 
 +preob procedure in station.prc has been edited to comment out systemp12. Will need re-enabling when tsys is back (Jim)
 +
 +===== Yarragadee Network =====
 +
 +If the network connection to Yarragadee dies, the VPN could need reseting:
 +
 +  * [[operations:​yg_VPN_reset|How to reset the Yarragadee VPN]]
  
 ===== Humidity monitor at Yarragadee ===== ===== Humidity monitor at Yarragadee =====
Line 166: Line 190:
 pfmed: exit pfmed: exit
 </​code>​ </​code>​
 +
 +Note that for Hobart26, the settings will be different (due to the LO frequencies of 8080/2020 MHz rather than 7600/1900 for the 12ms). e.g
 +
 +<​code>​
 +pfmed
 +pfmed: pf,r1593ke
 +pfmed: ed,ifdsx
 +</​code>​
 +<​code>​
 +ifa=1,​agc,​2,​40000
 +ifb=4,​agc,​1,​48000
 +ifc=2,​agc,​2,​32500
 +ifd=2,​agc,​2,​35000
 +</​code>​
 +<​code>​
 +pfmed: exit
 +</​code>​
 +
  
 ===== DBBC computer hangs/​crashes ===== ===== DBBC computer hangs/​crashes =====
/home/www/auscope/opswiki/data/attic/operations/currentissues.1470697848.txt.gz · Last modified: 2016/08/08 23:10 by Jim Lovell