User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Clock offsets and Delays

Field System and station time agreement

The fmset program can be used to confirm that the Field system time agrees with the station time. Open a terminal on pcfs[hb|ke|yg], and type


The Field System and Computer times should agree.

Maser to GPS, Formatter to GPS delays and difference

Now check the maser-GPS and delay through the DBBC and Mark5 (Formatter minus GPS) with the




commands respectively which read the Agilent counters. Log these values in the checklist. They should bethe same to within 0.5 microsec. The Log Monitor should report the difference whuch should be less than +/- 0.5 us.

Issue the maserdelay and clkoff commands a few times to check that they aren't drifting. A drift in the formatter-GPS time is usually an indication of a DBBC problem, usually requiring a reconfig to fix.

If one or both counters are not responding to these commands, you will see an error message like this

ERROR sp   -4 GPIB Device time-out on response c2

To fix this, try re-setting the counters. In the Operator Input window, type


and try the maserdelay and clkoff commands again.

/home/www/auscope/opswiki/data/attic/operations/documentation.clock_and_delay_check.1345005391.txt.gz · Last modified: 2012/08/15 04:36 by Jim Lovell