User Tools
operations:documentation.eremotecontrol_checklist_midob
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
operations:documentation.eremotecontrol_checklist_midob [2017/02/01 22:07] Tiege McCarthy |
operations:documentation.eremotecontrol_checklist_midob [2018/03/13 11:14] (current) Patrick Yates |
||
|---|---|---|---|
| Line 17: | Line 17: | ||
| * If the recording lags the summary file significantly (several 10s of gigabytes and backlog is growing), it might be an [[operations:documentation:pcfs_rfpic|rfpic]] issue. The recording does not start in time because it is waiting for the report from Monica. In this case you shall restart the Rxmon, at it is described in the [[operations:starting_monitoring_9.10.5#rfpic_problem|Other things to watch out for: "rfpic" problem]] | * If the recording lags the summary file significantly (several 10s of gigabytes and backlog is growing), it might be an [[operations:documentation:pcfs_rfpic|rfpic]] issue. The recording does not start in time because it is waiting for the report from Monica. In this case you shall restart the Rxmon, at it is described in the [[operations:starting_monitoring_9.10.5#rfpic_problem|Other things to watch out for: "rfpic" problem]] | ||
| * **Meteorology: Weather (wth) being logged**\\ Look through recent messages in the field system log for output from the ''wth'' command, which will look like this:\\/#wx#/16.1,1007.9,58.6\\ | * **Meteorology: Weather (wth) being logged**\\ Look through recent messages in the field system log for output from the ''wth'' command, which will look like this:\\/#wx#/16.1,1007.9,58.6\\ | ||
| + | * If the weather is either not updating, or not returning anything see [[operations:fixwth|this page]] | ||
| * **Meteorology: Sky conditions logged**\\ Make a note in the entry box of present weather conditions like cloud cover and wind e.g. "weather 50% cloud, light winds". | * **Meteorology: Sky conditions logged**\\ Make a note in the entry box of present weather conditions like cloud cover and wind e.g. "weather 50% cloud, light winds". | ||
| * **Tsys: S-band Tsys OK**\\ Check recent output from a systemp12 command (don't execute it unless the Mark5 is NOT recording) to see if the S-band Tsys is within the expected range (an indication will be given in brackets, but 80 to 100 K is typical). The monit3 window shows the most recent values and [[operations:documentation.test_tsys|here is how to interpret them]]. Note that at Ke, continuous Tsys measurements are made during scans and the monit3 window updates every 30s with these values. However you can obtain a Tsys value at any time at ke with the systemp12 command (see also these notes on [[operations:documentation.contcal|Continuous Calibration]]). Make a note in the log if it is outside this range. If it persists, or the values vary wildly, there may be a problem. | * **Tsys: S-band Tsys OK**\\ Check recent output from a systemp12 command (don't execute it unless the Mark5 is NOT recording) to see if the S-band Tsys is within the expected range (an indication will be given in brackets, but 80 to 100 K is typical). The monit3 window shows the most recent values and [[operations:documentation.test_tsys|here is how to interpret them]]. Note that at Ke, continuous Tsys measurements are made during scans and the monit3 window updates every 30s with these values. However you can obtain a Tsys value at any time at ke with the systemp12 command (see also these notes on [[operations:documentation.contcal|Continuous Calibration]]). Make a note in the log if it is outside this range. If it persists, or the values vary wildly, there may be a problem. | ||
/home/www/auscope/opswiki/data/attic/operations/documentation.eremotecontrol_checklist_midob.1485986850.txt.gz · Last modified: 2017/02/01 22:07 by Tiege McCarthy
Page Tools
