User Tools

Site Tools


operations:documentation.eremotecontrol_checklist_midob26

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


                  QuestionText = Antenna : on source and tracking
                  QuestionText = Time: Field System time (econtrol StatusMonitor) agrees with station time
                  QuestionText = Mark5: disk_pos OK
                  QuestionText = Meteorology: Weather (wth) being logged
                  QuestionText = Meteorology: Sky conditions logged (percentage cloud cover, rain etc)
                  QuestionText = Tsys: S-band Tsys 50 to 70K
                  QuestionText = Tsys: X-band Tsys 50 to 70K
- check the receiver position with ''rxpos''. Should be -256, +248, +18 (x,y,z) 
                  QuestionText = Cryogenics: Vacuum pressure less than 3.5
                  QuestionText = Cryogenics: 70K stage temperature below 65K
                  QuestionText = System: Any problems or concerns logged
                  QuestionText = Log Monitor audio check button sounds audible beep
- Use the "Audio test" button on the log monitor to check the alarms are audible.
- Make sure Skype is running to allow a chat session with all participating sites plus the on-call person
/home/www/auscope/opswiki/data/attic/operations/documentation.eremotecontrol_checklist_midob26.1399350254.txt.gz · Last modified: 2014/05/06 04:24 by Jim Lovell