User Tools

Site Tools


operations:documentation.ivs.commentsfile

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Prepare the comments file and transfer the logs

This can now be done from ops2.

  • Prepare the comments file for the log/end email:
    • First, check the paper logs (if any) for any comments or notes.
    • On ops run comments.sh
      observer@ops2:~$ comments.sh

      and it will show you some log extracts and get you to check it's all correct. Please also consult the Handover notes page for any comments that should be included. Afterwards, it will save the end message as /vlbobs/ivs/logs/<experiment name><station id>.comments

    • The text of the message will need editing to identify the VSN of the module(s) used. This is because the script picks up all the module VSNs in the log file every time there's a bank swap (e.g. for recording tests, VSN checks) not just the one that is finally recorded to.
  • Next, run flogit_auscope.pl
    observer@ops2:~$ flogit_auscope.pl

    and follow the instructions. It will handle the FTP transfer and send a stop message. A copy of the email is sent to the hbobserver Gmail account.

The AuScope VLBI Disk module spreadsheet contains details on the modules as well as a summary. Go to the Summary tab for the information you need to put in the disk inventory section of the message.

/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.commentsfile.1398753621.txt.gz · Last modified: 2014/04/29 06:40 by Jim Lovell