User Tools
operations:documentation.ivs.drudg_ureop
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:documentation.ivs.drudg_ureop [2012/11/27 23:12] Jamie McCallum |
operations:documentation.ivs.drudg_ureop [2013/01/22 21:31] (current) Jamie McCallum |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| The ultra-rapid EOP measurements use either modified IVS schedules (with Hobart in "tag-along" mode) or bespoke schedules. In either case, the usual slogit procedures can be used but you should make sure that the correct skd file is in /vlbobs/ivs/sched/ on ops-serv2 before starting & make sure it doesn't get overwritten by downloading the unmodified schedule. | The ultra-rapid EOP measurements use either modified IVS schedules (with Hobart in "tag-along" mode) or bespoke schedules. In either case, the usual slogit procedures can be used but you should make sure that the correct skd file is in /vlbobs/ivs/sched/ on ops-serv2 before starting & make sure it doesn't get overwritten by downloading the unmodified schedule. | ||
| - | Prepare the schedue and procedure files as usual but make sure that checkmk5 will not attempt to generate autocorrelations, and that preob and postob procedures look like this: | + | Prepare the scheduLe and procedure files as usual but make sure that checkmk5 will not attempt to generate autocorrelations, and that preob and postob procedures look like this: |
| <code> | <code> | ||
| define checkmk5 00000000000x | define checkmk5 00000000000x | ||
| "sy=/home/oper/bin/auto_cor_check_web_1bit_8MHz_hb.sh & | "sy=/home/oper/bin/auto_cor_check_web_1bit_8MHz_hb.sh & | ||
| - | scan_check | + | "scan_check |
| - | mk5=get_stats? | + | "mk5=get_stats? |
| - | mk5=status? | + | "mk5=status? |
| enddef | enddef | ||
| define preob 00000000000x | define preob 00000000000x | ||
| Line 32: | Line 32: | ||
| Also check that /home/oper/bin/data2vortex.sh is going to do the right thing, check that the directory on vortex is mounted on mk5hb. | Also check that /home/oper/bin/data2vortex.sh is going to do the right thing, check that the directory on vortex is mounted on mk5hb. | ||
| - | |||
| - | Then in the SNAP file on pcfs[hb|ke|yg], remove all checkmk5 calls like this: | ||
| - | |||
| - | <code> | ||
| - | cd /usr2/sched | ||
| - | grep -v checkmk5 rd1106hb.snp > tmp.snp | ||
| - | mv rd1106hb.snp rd1106hb.snp.orig | ||
| - | mv tmp.snp rd1106hb.snp | ||
| - | </code> | ||
/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.drudg_ureop.1354057944.txt.gz · Last modified: 2012/11/27 23:12 by Jamie McCallum
Page Tools
