User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Finishing an observation

At the end of an observation, the antenna should return to stow and eRemoteControl will bring up a checklist to run through. Here are some notes on the checklist:

After it has, exit from the Field System, by typing the following command in the eRemoteControl operator input window:


Exit the log monitor program.

If Yarragadee is observing, email the operator to let him know the observation is finished and the telescope has gone to stow at

Please power-down the stairwell monitors using the switches under the main desk labelled Screen 1, Screen 2, … when finishing an experiment or after hours to save power.

If another experiment follows this one, go to the next step: following on with another observation.

/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.finishing_v2.1346738882.txt.gz · Last modified: 2012/09/04 06:08 by Jim Lovell