User Tools
operations:documentation.ivs.mark5_module_selection
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
operations:documentation.ivs.mark5_module_selection [2019/01/25 00:23] Warren Hankey |
operations:documentation.ivs.mark5_module_selection [2019/01/25 00:24] (current) Warren Hankey |
||
|---|---|---|---|
| Line 9: | Line 9: | ||
| ===== Data requirement ===== | ===== Data requirement ===== | ||
| - | On the [[operations:log|AuScope IVS Module Allocation spreadsheet]] there should be a data size indicated for the current experiment (2017 module allocation tab); otherwise refer to a similar historical experiment with a data size. On this spreadsheet the station staff also record which module has been provisionally allocated to the experiment and loaded in the Mk5. | + | On the [[http://131.217.63.180:8000| Experiment and Module Library]] there should be a data size indicated for the current experiment; otherwise refer to a similar historical experiment with a data size. On this site the station staff also record which module has been provisionally allocated to the experiment and loaded in the Mk5. |
| Also at the end of the printed schedule summary is an estimate of the total amount of data that will be recorded for the experiment. For example, this experiment requires a tad under 1.4 TB: | Also at the end of the printed schedule summary is an estimate of the total amount of data that will be recorded for the experiment. For example, this experiment requires a tad under 1.4 TB: | ||
| Line 43: | Line 43: | ||
| ==Doubling up== | ==Doubling up== | ||
| - | All R4, CRDS and CRF experiments from Katherine and Yarragadee need to be directly shipped to Washington, so please avoid putting them on a module with another experiment. | + | All R4, experiments from Katherine and Yarragadee need to be directly shipped to Washington, so please avoid putting them on a module with another experiment. |
| Everything else needs to be shipped to Hobart for e-transfer to the correlator. Therefore, two experiments, if they fit, can go on the same module. However, **R1's** do need to get to Hobart **__ASAP__**. Often there will be an R1 straight after another experiment. It is undesirable, but in a pinch the R1 can go on the same module with the last experiment, providing the R1 is the LAST experiment to be recorded (and there is enough disk space!). | Everything else needs to be shipped to Hobart for e-transfer to the correlator. Therefore, two experiments, if they fit, can go on the same module. However, **R1's** do need to get to Hobart **__ASAP__**. Often there will be an R1 straight after another experiment. It is undesirable, but in a pinch the R1 can go on the same module with the last experiment, providing the R1 is the LAST experiment to be recorded (and there is enough disk space!). | ||
/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.mark5_module_selection.1548375783.txt.gz · Last modified: 2019/01/25 00:23 by Warren Hankey
Page Tools
