User Tools

Site Tools


operations:documentation.ivs.newstart

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:documentation.ivs.newstart [2011/04/03 16:49]
Jim Lovell
operations:documentation.ivs.newstart [2011/10/26 06:37] (current)
Line 3: Line 3:
  
 If a new Mark5 disk module is needed, remove the old one, making sure you label it and put a red sticker over the green dot. Then  If a new Mark5 disk module is needed, remove the old one, making sure you label it and put a red sticker over the green dot. Then 
-  * Insert ​a new module+  * If a new Mark5 module is needed: 
 +    * [[http://​www.youtube.com/​watch?​v=IPVQM0tGNgo|Remove the Mark5 module]] 
 +    * [[http://​www.youtube.com/​watch?​v=bTk3_iauRUo|Insert an empty Mark5 module]]
   * [[operations:​documentation.DBBCSetupIVS|Configure the DBBC]] (if necessary)   * [[operations:​documentation.DBBCSetupIVS|Configure the DBBC]] (if necessary)
   * [[operations:​documentation.ivs.mark5|Configure the Mark 5 and make a test recording]]   * [[operations:​documentation.ivs.mark5|Configure the Mark 5 and make a test recording]]
-  * [[operations:​monitoring_hb|Start the observations]]+  * [[operations:​starting_monitoring|Start the observations]]
  
/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.newstart.1301849371.txt.gz · Last modified: 2011/10/26 06:37 (external edit)