User Tools
operations:documentation.ivs.newstart
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
operations:documentation.ivs.newstart [2011/04/03 16:48] Jim Lovell created |
operations:documentation.ivs.newstart [2011/10/26 06:37] (current) |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| If a new Mark5 disk module is needed, remove the old one, making sure you label it and put a red sticker over the green dot. Then | If a new Mark5 disk module is needed, remove the old one, making sure you label it and put a red sticker over the green dot. Then | ||
| - | * Insert a new module | + | * If a new Mark5 module is needed: |
| - | * Reprogram the DBBC (if necessary) | + | * [[http://www.youtube.com/watch?v=IPVQM0tGNgo|Remove the Mark5 module]] |
| - | * Configure the Mark 5 and make a test recording | + | * [[http://www.youtube.com/watch?v=bTk3_iauRUo|Insert an empty Mark5 module]] |
| - | * Start the observations | + | * [[operations:documentation.DBBCSetupIVS|Configure the DBBC]] (if necessary) |
| + | * [[operations:documentation.ivs.mark5|Configure the Mark 5 and make a test recording]] | ||
| + | * [[operations:starting_monitoring|Start the observations]] | ||
/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.newstart.1301849283.txt.gz · Last modified: 2011/10/26 06:37 (external edit)
Page Tools
