User Tools
operations:documentation.ivs.newstart_v3_fs9.10.5
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Last revision Both sides next revision | ||
|
operations:documentation.ivs.newstart_v3_fs9.10.5 [2012/11/13 03:08] Jim Lovell [Starting] |
operations:documentation.ivs.newstart_v3_fs9.10.5 [2014/10/13 03:44] Imogen Jones [Following on with another observation] |
||
|---|---|---|---|
| Line 66: | Line 66: | ||
| > * [[operations:documentation.DBBCSetupIVS_9.10.5|DBBC Setup]] | > * [[operations:documentation.DBBCSetupIVS_9.10.5|DBBC Setup]] | ||
| - | At the start of every scan, the pcfs executes the ''setupsx'' or ''setup8f'' procedure (depending on experiment type) which sets the DBBC input channels, filters and BBC frequencies (and configues the Mark5). However, it's a good idea to execute it now so that a recorder test can be made: | + | At the start of every scan, the pcfs executes the ''setupsx'' which sets the DBBC input channels, filters and BBC frequencies (and configues the Mark5). However, it's a good idea to execute it now so that a recorder test can be made: |
| * For R1, R4, RD, RDV, T2, ANZ, CRDS, CRF, OHIG:<code>setupsx</code> | * For R1, R4, RD, RDV, T2, ANZ, CRDS, CRF, OHIG:<code>setupsx</code> | ||
| - | * For AUST, CONT:<code>setup8f</code> | + | |
| - | ''setupsx'' (or ''setup8f'') calls ''ifdsx'' which sets up the DBBC Conditioning module inputs, filters and power levels, then ''dbbcsx8'' (or ''dbbcsx4'' for a 4 MHz DBBC mode) which sets the BBC frequencies. Then if you type: | + | ''setupsx'' calls ''ifdsx'' which sets up the DBBC Conditioning module inputs, filters and power levels, then ''dbbcsx8'' (or ''dbbcsx4'' for a 4 MHz DBBC mode) which sets the BBC frequencies. Then if you type: |
| <code>iread</code> | <code>iread</code> | ||
| You will see what the current Conditioning module settings are. Output format is: | You will see what the current Conditioning module settings are. Output format is: | ||
/home/www/auscope/opswiki/data/pages/operations/documentation.ivs.newstart_v3_fs9.10.5.txt · Last modified: 2018/09/25 22:09 by Pradyumna Kiran Kummamuru
Page Tools
