User Tools
operations:documentation.logmonitor_eremotectrl
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:documentation.logmonitor_eremotectrl [2014/06/05 06:33] Jim Lovell |
operations:documentation.logmonitor_eremotectrl [2016/12/20 04:05] (current) Jim Lovell |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| - The red dot icon in econtrol should now show a green bar in the top left to indicate that the log is being recorded:\\ {{:operations:econtrol_log_recording.png|}} | - The red dot icon in econtrol should now show a green bar in the top left to indicate that the log is being recorded:\\ {{:operations:econtrol_log_recording.png|}} | ||
| - Type a command into the Operator Input section (next to the blue triangle) so that the new log file is created. e.g. <code>clkoff</code> | - Type a command into the Operator Input section (next to the blue triangle) so that the new log file is created. e.g. <code>clkoff</code> | ||
| - | - Now start the log monitor from the Applications menu on ops2:\\ ''Applications -> AuScope -> Log monitor'' | + | - Now start the log monitor from the Applications menu on ops8:\\ ''Applications -> AuScope -> Log monitor'' |
| + | - Or try the [[operations:documentation.logmonitor_v3|new experimental version]]. | ||
| - You will be asked which station is being monitored (type 1, 2 or 3) and then the GUI will start. | - You will be asked which station is being monitored (type 1, 2 or 3) and then the GUI will start. | ||
| - Select\\ ''File -> Open Log File'' \\ and type in the name of the log file you just created (e.g. ''/vlbobs/ivs/logs/r4456_yg_econtrol.log'') or click on Browse and find the file. | - Select\\ ''File -> Open Log File'' \\ and type in the name of the log file you just created (e.g. ''/vlbobs/ivs/logs/r4456_yg_econtrol.log'') or click on Browse and find the file. | ||
| Line 20: | Line 21: | ||
| - You can control the behaviour of SMS alarms remotely by putting comments in the PCFS log: | - You can control the behaviour of SMS alarms remotely by putting comments in the PCFS log: | ||
| - [[operations:documentation:control_sms_alarms_remotely|Remote control of SMS alarms]] | - [[operations:documentation:control_sms_alarms_remotely|Remote control of SMS alarms]] | ||
| + | - There is a watchdog feature which remembers when the last field system log entry was received. If it is more than 15 minutes ago, the log monitor will start to beep. This is to trap field system software failures and network dropouts. | ||
| + | - This 15 minute timeout can be changed from the graphical interface. | ||
| + | - The log monitor won't start checking the time difference until the first //new// log entry is received | ||
| + | - Once a setup is complete there may be several hours before the next log entry at the experiment start. In this case, a series of incessant beeps after 15 minutes could get annoying. Pressing the "Reset watchdog" button will reset the log line counter to zero, meaning that the time difference will not be checked again until there's a new entry. | ||
| - | Note the log monitor script can also be started on ops6 (the PC in the "Lounge"). Just open a terminal window and repeat steps 5 and 6 above. Both ops2 and ops6 share the /vlbobs directory, so log recording needs to be started only from one place. | + | To set the optimal timeout values in the log monitor open a terminal on ops2 and type ./watchdog_check.sh <experiment name>, this will return a value to input into the log monitor for each telescope involved in the experiment. |
| + | For example: | ||
| + | <code> | ||
| + | ./watchdog_check.sh r4734 | ||
| + | </code> | ||
| + | Will return: | ||
| + | <code> | ||
| + | hb12: Set watchdog timeout to 12 minutes | ||
| + | ke12: Set watchdog timeout to 16 minutes | ||
| + | yg12: Set watchdog timeout to 19 minutes | ||
| + | </code> | ||
| + | Note the log monitor script can also be started on ops6 (the PC in the "Lounge"). Just open a terminal window and repeat steps 5 and 6 above. Both ops2 and ops6 share the /vlbobs directory, so log recording needs to be started only from one place. | ||
| ====== Configuring the log monitor ====== | ====== Configuring the log monitor ====== | ||
/home/www/auscope/opswiki/data/attic/operations/documentation.logmonitor_eremotectrl.1401950033.txt.gz · Last modified: 2014/06/05 06:33 by Jim Lovell
Page Tools
