This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- operations:documentation:ke_lights [2014/02/12 22:47]
Jim Lovell created
+++ operations:documentation:ke_lights [2014/06/23 10:33]
liza
@@ Line 1: / Line 1: @@
-====== Controlling the lights at Katherine ======
+====== Controlling the lights and resetting the web camera at Katherine ======
-There are two lights that can be controlled remotely at Katherine: an external one to illuminate the antenna and an internal one to light up the racks. Both are connected to the same port on the internet power switch. Please turn them off when they are not in use so we don't attract the insects.
+===== Lights =====
-To control the lights, open a terminal on pcfske and type <code>LightOn.sh</code> or <code>LightOff.sh</code>
+There are two lights that can be controlled remotely at Katherine: an external one to illuminate the antenna and an internal one to light up the racks. The external light is connected to the internet power switch ''ipske'' The interior light which illuminates the modules is connected to ''pdu1ke.phys.utas.edu.au''. Please turn them off when they are not in use so we don't attract the insects.
+There are scripts to control the exterior lights. Open a terminal on pcfske and type <code>LightOn.sh</code> or <code>LightOff.sh</code>
+===== Camera =====
 A similar script exists to reset the web camera: <code>ResetCamera.sh</code>