User Tools
operations:documentation:ke_lights
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:documentation:ke_lights [2014/02/12 22:49] Jim Lovell |
operations:documentation:ke_lights [2014/07/07 10:16] (current) liza [Lights] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Controlling the lights and resetting the web camera at Katherine ====== | ====== Controlling the lights and resetting the web camera at Katherine ====== | ||
| - | ===== Lights ===== | + | ===== New way: Lights ===== |
| - | There are two lights that can be controlled remotely at Katherine: an external one to illuminate the antenna and an internal one to light up the racks. Both are connected to the same port on the internet power switch. Please turn them off when they are not in use so we don't attract the insects. | + | mk5 light for reading module labels is no longer connected to exterior light switch on ipske. It now switches on pdu1ke.phys.utas.edu.au and is labelled light int. The user is admin and the password is the same one we use for the internet power switches. Choose the socket and press the button "ON" below. In the pop-up window, choose "OK". After reading the label, press "OFF" button and "OK" again. |
| - | To control the lights, open a terminal on pcfske and type <code>LightOn.sh</code> or <code>LightOff.sh</code> | + | |
| + | ===== Old way: Lights ===== | ||
| + | |||
| + | There are two lights that can be controlled remotely at Katherine: an external one to illuminate the antenna and an internal one to light up the racks. The external light is connected to the internet power switch ''ipske'' The interior light which illuminates the modules is connected to ''pdu1ke.phys.utas.edu.au''. Please turn them off when they are not in use so we don't attract the insects. | ||
| + | |||
| + | There are scripts to control the exterior lights. Open a terminal on pcfske and type <code>LightOn.sh</code> or <code>LightOff.sh</code> | ||
| ===== Camera ===== | ===== Camera ===== | ||
/home/www/auscope/opswiki/data/attic/operations/documentation/ke_lights.1392245378.txt.gz · Last modified: 2014/02/12 22:49 by Jim Lovell
Page Tools
