User Tools

Site Tools


operations:documentation:start_monica

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Starting the MONICA client

  1. Open a terminal on ops-serv2. E.g. from ops2, open a terminal and type:
    ssh observer@ops-serv2
  2. Start the MONICA client. This should be done once for every antenna you want to monitor. Specifyh the Field System PC at the desired site. E.g. for Yarragadee:
    ./omc.sh

    then select pcfsyg.

  3. A blank Monitor Display window will appear.
/home/www/auscope/opswiki/data/attic/operations/documentation/start_monica.1385435395.txt.gz · Last modified: 2013/11/26 03:09 by Jim Lovell