User Tools

Site Tools


operations:documentation:start_monica

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
operations:documentation:start_monica [2013/11/26 03:09]
Jim Lovell created
operations:documentation:start_monica [2016/10/05 17:30] (current)
Jesse Swan [Monica for the 26m]
Line 1: Line 1:
 ====== Starting the MONICA client ====== ====== Starting the MONICA client ======
   - Open a terminal on ops-serv2. E.g. from ops2, open a terminal and type: <​code>​ssh observer@ops-serv2</​code>​   - Open a terminal on ops-serv2. E.g. from ops2, open a terminal and type: <​code>​ssh observer@ops-serv2</​code>​
-  - Start the MONICA client. This should be done once for every antenna you want to monitor. ​Specifyh ​the Field System PC at the desired site. E.g. for Yarragadee: <​code>​./​omc.sh</​code>​ then select ''​pcfsyg''​.+  - Start the MONICA client. This should be done once for every antenna you want to monitor. ​Specify ​the Field System PC at the desired site or ops-serv2 if you want to monitor network connectivity. E.g. for Yarragadee: <​code>​./​omc.sh</​code>​ then select ''​pcfsyg''​.
   - A blank ''​Monitor Display''​ window will appear.   - A blank ''​Monitor Display''​ window will appear.
 +
 +====== If MONICA does not start at Hobart ======
 +  - ssh into pcfshb as root
 +  - Now restart the client by entering:
 +<​code>​ /​etc/​init.d/​Monica.weather stop </​code>​
 +
 +and then
 +
 +<​code>​ /​etc/​init.d/​Monica.weather start </​code>​
 +
 +====== Monica for the 26m ======
 +[[software:​monica_26m_cryo|Monica for 26m Cryo]]
/home/www/auscope/opswiki/data/attic/operations/documentation/start_monica.1385435395.txt.gz · Last modified: 2013/11/26 03:09 by Jim Lovell