User Tools

Site Tools


operations:documentation:start_monica

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Starting the MONICA client

  1. Open a terminal on ops-serv2. E.g. from ops2, open a terminal and type:
    ssh observer@ops-serv2
  2. Start the MONICA client. This should be done once for every antenna you want to monitor. Specify the Field System PC at the desired site or ops-serv2 if you want to monitor network connectivity. E.g. for Yarragadee:
    ./omc.sh

    then select pcfsyg.

  3. A blank Monitor Display window will appear.

If MONICA does not start at Hobart

  1. ssh into pcfshb as root
  2. Now restart the client by entering:
 /etc/init.d/Monica.weather stop 

and then

 /etc/init.d/Monica.weather start 
/home/www/auscope/opswiki/data/attic/operations/documentation/start_monica.1415602279.txt.gz · Last modified: 2014/11/10 06:51 by Vasaant Krishnan