User Tools

Site Tools


operations:documentation_lba_mtp

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:documentation_lba_mtp [2013/03/14 00:32]
Jim Lovell
operations:documentation_lba_mtp [2013/03/14 02:01] (current)
Jim Lovell
Line 11: Line 11:
   * [[operations:​documentation:​lba_starting_and_monitoring|Starting and monitoring observations]]   * [[operations:​documentation:​lba_starting_and_monitoring|Starting and monitoring observations]]
  
-Starting from scratch (using VNC sessions timeke:0 dbbcke:0 pcfske:1) 
-  * Check Displays on timeke (antenna, maser, anemometer, Clock) 
-  * Check DBBC server is running in dbbcke 
-  * On pcfske: 
-    * ssh to mk5ke and check mk5 software is running 
-    * Start FS 
-    * run fmset, check clocks are OK (looking for NO sycerr_gt_3 for Mark5B, all 3 times synchronised). If a problem, use option '​s'​. ESC when finished ​ 
-      * in the FS load the first non-fringe-finding experiment : 
-        * proc=v252aike 
-        * setup01 
-      * Now do a test recording check spectra and bit stats 
-        * disk_record=on 
-        * disk_record=off 
-        * scan_check 
-        * postob 
-      * Start the schedule 
-        * schedule=vc189ke 
-  *  
/home/www/auscope/opswiki/data/attic/operations/documentation_lba_mtp.1363221177.txt.gz · Last modified: 2013/03/14 00:32 by Jim Lovell