User Tools

Site Tools


operations:documentation_ops2_pcfs9.10.5plus

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:documentation_ops2_pcfs9.10.5plus [2020/03/26 01:46]
Jamie McCallum
operations:documentation_ops2_pcfs9.10.5plus [2020/09/21 05:49] (current)
Jamie McCallum [Monitoring Observations on the 26-m]
Line 1: Line 1:
 ====== Operator Documentation for observations ====== ====== Operator Documentation for observations ======
-<note important>​Off-site experiment monitoring notes [[operations:​documentation_ops2_pcfs9.10.5plus:​offsite|]]</​note>​ 
 ====== Background ====== ====== Background ======
   * Background reading for new operators   * Background reading for new operators
Line 16: Line 15:
     * [[operations:​maps|Maps]]     * [[operations:​maps|Maps]]
 ===== IVS Observation Instructions ===== ===== IVS Observation Instructions =====
 +
 +**[[operations:​documentation_ops2_pcfs9.10.5plus:​offsite|Off-site experiment monitoring notes]]**
  
 Below are the links to a step-by-step procedure for making IVS observations on the 12m and 26mtelescopes. The current version of e-RemoteCtrl has a built-in checklist which can now be used during the setup procedure. So the first task is to start the Observing and monitoring software at each site, then e-RemoteCtrl. Below are the links to a step-by-step procedure for making IVS observations on the 12m and 26mtelescopes. The current version of e-RemoteCtrl has a built-in checklist which can now be used during the setup procedure. So the first task is to start the Observing and monitoring software at each site, then e-RemoteCtrl.
Line 310: Line 311:
 ==== Monitoring Observations on the 26-m ==== ==== Monitoring Observations on the 26-m ====
  
-  * Please note that e-RemoteControl ​does not adequately show the recorded/​free space on module in mkvTo see how full is the module, please use commands //​mk5=bank_set//​ (module capacity) and //​disk_pos//​ (write pointer position).+  * Please note that e-RemoteControl ​is now longer supported and will not connect to the field system! 
 +  * Instead, please use ''​stream_log ho''​ to create ​local file for the log monitor 
 +  * Checklists now have to be manually triggered with ''​checklistHo $exper''​ (where ''​$exper'' ​is the experiment name) - to launch the start or end checklists, please use ''​checklistHo $exper start''​ or ''​checklistHo $exper stop''​ repectively
   * Parameters of the check-list during observation for 26-m are [[operations:​documentation.eremotecontrol_checklist_midob26|explained here]].   * Parameters of the check-list during observation for 26-m are [[operations:​documentation.eremotecontrol_checklist_midob26|explained here]].
  
/home/www/auscope/opswiki/data/attic/operations/documentation_ops2_pcfs9.10.5plus.1585187161.txt.gz · Last modified: 2020/03/26 01:46 by Jamie McCallum